Ellie asked:


rly years there was only one way to heat your home. That was wood. We have found that we can heat our homes with many different sources of energy. Today we have electric, natural gas, propane, fireplace and even wood stoves. With the rising costs of all of these choices consumers are trying to conserve so they find themselves reverting back to wood heat. To supply the wood to homes with wood stoves and fireplaces it has to be cut to down to size. There are many ways to cut wood such as an ax, chain saw, sledge hammer and wedge, and even a wood splitter.

The most effective way of cutting wood in large sums is to purchase a wood splitter. This allows your wood to be split with ease. First the trees have to be cut down and trimmed so when the wood is placed in the splitter it will not sling these objects back at the person operating it. They then cut the tree into smaller logs with a chain saw so the wood will fit with ease. Each machine has an allowance for different size logs. Be sure to reference this when deciding which splitter to purchase. You want your logs to match your stove or fireplace with room to allow air flow.

Once you have your wood cut into smaller logs it is time to insert them into the wood splitter. Each splitter running on a different source of energy whether it be electric, gas, or hydraulic they will still have safety\’s. Each machine is operated by a press of a button. So once you are sure everyone has their hands away from the machine you may go ahead engage the splitter. You will find that it moves swiftly and splits the wood with ease.

There are many resources in which to find out information about wood splitters such as the Internet. The websites that you review can give you suggestions on what type of wood splitter would be best for the type of job that you have to do. The prices of wood splitters can be anywhere from $99.00 for an easy splitter that is mainly used by an individual for home use up to a couple thousand dollars for a much larger job done by companies that supply wood to consumers. You are sure to find the information that you need in order to make an informative decision on the type of wood splitter that you would need.

wood oil

Ellie asked:


many different uses of the electric wood splitter. Some uses of the wood splitter are for personal use and some for professional use. The electric splitter is better suited for use for small logs, soft logs, or even logs with knots in it. Trees like maple, oak, or walnut are too hard for the smaller ton electric splitter. It is better to use a hydraulic wood splitter for the tougher projects where applicable. All wood can be split with any wood splitter, however, it is not safe to use any wood splitter. Utilize all safety precautions when using a wood splitter and its extra equipment.

When using an electric wood splitter for cutting the softer woods you need to take caution that those types of woods will split easier than the hard woods. They might kick back as more pressure is applied. Harder woods will take longer to split through allowing a softer impact. There tends to be many possible ton options for the electric splitters. There are two size splitters that interested me when doing research. The first being a 4-ton electric splitter and the second being a 6-ton electric splitter. Both had varying differences with the same general response but one packs more punch.

The 4-ton electric wood splitter is a light weight splitter that weighs only 99lbs. It can hold a log up to 10 inches in diameter, 36 inches long and 14 inches wide. This machine utilizes up to 8,000 lbs of pressure to split through logs of any varying hardness. The hydraulic pump on this machine can hold up to 4-1/4 quarts of hydraulic fluid. The electric motor operates off of a 110 outlet allowing any extension cord to be used. Supporting a 1800 watt power supply. Make sure you are utilizing this machine in guidelines with it\’s manual.

The 6-ton electric wood splitter is a little bit heavier than the 4-ton weighing in at 169 lbs. It measures to hold up to 16 inches in diameter, 41.5 inches long and 14 inches wide. There are 12,000 pounds of power supplied behind the splitter head. The hydraulics in this machine support 6.87 quarts of hydraulic fluid. This machine is also running on a 110 power outlet and 1800 watt more. The electric machines are an acceptable wood splitter to use when working with the smaller and softer logs. All wood splitters need to be assessed for the type of project you are going to complete.

wood veneer

Allison Thomas asked:


Wood planters are a beautiful and functional addition to any outdoor setting. Whether they are placed on a small balcony or within a large garden, a well-chosen wood planter will both complement and enhance the décor.

Based on my experience as a botanical garden worker, I can say that wood planters are durable, sturdy and easily crafted into different styles and finishes. I have had fun “making them my own”.

A colored stain lets the grain of the wood show through while adding interest and texture. You can get more creative by adding a stenciled pattern to the wood or even glass mosaic tiles for a wonderful effect.

The versatility of wood planters is unlimited. They can be used as window boxes, hanging containers and self standing planters. These planters are striking at front doors, on balconies, in patios, around pools and throughout any garden.

Try to think about your space and where these could work. Maybe you have done the patio or just outside the window. How about trying the one as a window enhancement?

It’s hard to beat the beauty and strength of wood planters, but not all woods are created equal. While these time-honored planters showcase the finer details of outdoor living, different woods exhibit different properties.

You have a lot of choice out there. Here are some tidbits of information I have gathered based on my own experience. Also ask a gardening friend or your local shop about their thoughts as you decide what type of material is right for you. Sometimes it is hard to find a variety in retail stores, so an online solution might be best.

• Teak planters are elegant and long-lasting. The wood is resistant to decay.

• Redwood cedar is durable and has a natural resistance to rotting.

•Wood planters in general (versus plastic) hold their handsome appearance year after year with very little maintenance.

• Painted wood planters can complement home design and color.

• Wood planters work well with other accessories like benches and trellises.

• Cedar wood planters add personality and tradition.

• Wood planters come in many shapes and sizes.

• Wood planters do better in colder weather and provide more insulation than other planter materials.

Extending the life of your wood planter is easy and requires very little effort. If you decide to treat the wood with a stain or waterproofing agent prior to planting it, make sure it is a non-toxic agent. Next, line the planter with heavy duty plastic. The plastic will keep water away from the wood. Fill the bottom of the planter with a layer of crushed rock followed by soil, leaving about three inches from the top.

Do not be afraid to make the box your own with a stain that matches your taste. Any wood stain found at your local hardware or home center will do.

You are now ready to plant flowers from your local nursery. Final step, enjoy! You cannot go wrong by spreading the love of flowers, plants and vegetable gardens. One of life’s little pleasures is the world of gardening.



2 wood

Michael Ochoa asked:


This article contains a plethora of information and would be difficult to take in all at once. For that reason, I have broken this article into two parts.

“Caveat Emptor” is Latin for “Let the buyer beware”.

We all want to pay as little as possible for the most product we can buy. The challenge we have is to pay enough attention to what it is we are actually purchasing so as not to become let down later when we find out we did not really get what we thought we would be getting.

When it comes to outdoor furniture, Teak wood is still the standard that all other woods are compared to. Because it is in such high demand, consumers want to purchase this best quality product or something even better, for less money. If marketers can help the buyer to perceive they are getting something better for less money the buyer tends to jump on it. And therein lies the problem: Perception. There is outdoor wood furniture being advertised as teak like, better than teak, or stronger than teak for a fraction of the cost. When you look further into the advertisements, you find the product to be made of woods like Shorea or Eucalyptus. But is this wood as good as or better than teak? Does this wood weather the elements year in and year out like Teak? Do you do very little to maintain it like you do Teak? It sure sounds like it could be, don’t it?

Shorea wood.

Here is how Wikipedia defines Shorea wood: Shorea is a genus of 360 species of mainly rainforest trees in the family Dipterocarpaceae. They are native to Southeast Asia, from Northern India to Malesia, Indonesia and the Philippines.

There are marketers that are marketing Shorea wood as being closely related cousins to Teak. Teak is Tectona Grandis: It is a genus of tropical hardwood trees in the family Verbenaceae. To say they are closely related is kind of like saying all spruces are evergreens but not all evergreens are spruces. It doesn’t make sense. And because there are more than 360 species of trees that make up Shorea, some being good and some being not so good, which type are you really getting that “good deal” on?

Here are some common names being used by marketers to be “like Teak”, but are really Shorea:

Balau. This is a heavy hardwood. It comes from up to 15 different species of Shorea genus.

Almon. Also known as white luan. This wood comes from up to 5 different species of Shorea genus.

White Meranti. This is a light hardwood. It comes from up to 8 different species of Shorea genus.

Dark Red Meranti. This is also a light hardwood. It comes from up to 11 different species of Shorea genus.

Yellow Meranti. This is also a light hardwood. It comes from up to 5 different species of Shorea genus.

We can go on and on. After all, there are up to 360 different species of Shorea genus to go through. These are beautiful woods that can be used for indoor furniture as well as decorative artifacts, doors, drawers, joints and even outdoor furniture. But let us not be confused: they are not Teak wood. And the fact that marketers are trying to pass them off as Teak tells us squarely: Teak is still the best. Teak is still the wood that all others try to compare to.

Eucalyptus Genus.

There are over 300 species of Eucalyptus genus. This is a very fine wood that has been put to many good uses through the years from windbreaks, to fuel, to building supplies, to food sources in some countries. It is cautioned that this wood needs to be seasoned properly prior to manufacturing otherwise it will split, ***** and chip. Since it holds such a heavy volume of water in order to sustain its very fast growth, it is reported to shrink as much as 34% when kiln dried.

In doing research on Eucalyptus, here is what one company had to say: “When finished with a high quality penetrating oil, mixed with the stain of your choice, Eucalyptus takes on a teak-like appearance. To maintain a new look, the buyer will need to occasionally clean and reseal the furniture. This furniture can be painted as well”. Teak once again is being used as the standard.

When you are shopping for outdoor furniture this year, make sure you know what type of wood it is that you are purchasing. Don’t be fooled. Read the fine print. Thinking your purchase is Teak wood because you want the beauty of Teak, the ability for your furniture to weather the elements including termites, beetles, fungus, and wood rot, you could be sorely disappointed. In order to maintain sales volume, manufactures and marketers are offering alternative wood outdoor furniture to the consumers as prices for Teak are steep and supply is limited. Although these listed woods look beautiful and may hold up for a short period of time, they do not have the staying power of Teak wood outdoor furniture.



NEWTON

Michael Ochoa asked:


Do you know just how durable teak wood chair or a teak wood table really is and what makes it that way? Have you ever thought about where this teak wood is harvested from and how long it has to grow before it can be harvested?

Well, if you have pondered some of these questions you are in luck because you will find some answers here.  If you haven’t pondered these questions, or questions like it, then this will just be a fun learning experience for you.  And hey, this article will make an excellent conversation starter at your next family get together or your next party.  You will be the hit of the gathering!

In researching this article, I could only go back in time about 600 years.  That was the time frame when the Chinese Ming Dynasty had a pretty powerful fleet of ships called “junk” ships.  These ships were built out of teak wood.  These were huge, powerful sailing ships that could carry thousands of men and cargo for extended periods of time.  The Teak wood used was said to have been buried for several years before the Chinese deemed it usable to build into one of these ships.  The Chinese knew that teak wood could withstand the sun while out on the ocean.  They also knew that teak wood would not shrink when exposed to the wind, the heat, the rain or the salty ocean water itself.  These are some of the main reasons why boat and shipbuilders today still prefer to use teak wood when building ocean vessels.  Because teak wood experiences such little shrinkage, it makes an excellent choice for the ships doors and cabinets.

Teak wood contains a very large percentage of silica (sand) and natural oils.  It is also a very dense wood.  Because of these characteristics, teak wood is the preferred wood for decking either on ships or at the home.  Believe it or not, the silica content in teak wood actually helps to attain sure footing when used in the flooring of a ship.  The oil content assures its durability.  To maintain it, it just needs to be cleaned off periodically.  The benefits do not end there.  Because of the oil content, the silica, and the density of the wood, teak wood does not react with any metals that may come in contact with it. These are the same characteristics that have caused people around the world, and companies that operate resorts and retreats to invest in outdoor patio furniture made of teak wood.

Back to the article at hand.  The Ming dynasty needed to tough ships for several reasons, one very important being that it wanted the word of Zen spread to all lands to the edge of the earth.  It is being reported that indeed, the Chinese did just that.  It was 600 years ago that the Chinese circumnavigated the earth, and they did so in ships made of Teak wood.

 

Teak wood takes approximately 50 to 60 years to grow to maturity.  One reason for the cost is just that.  It is a commodity that is heavy demand, but with a limited, recurring supply.

In early history, Britain was very interested to grow and produce this wood.  The British quickly realized they did not need to grow Teak Wood as they could annex those countries where the Teak wood was grown and have a plentiful supply:  India, Thailand and Burma.  I am not saying this is why the British took over Asia and India, but it certainly helped to give reason.  Myanmar (formerly Burma), which is just south of India, and Yangoon became the first places where teak was being harvested for British ships.  Calcutta was set up as another British shipbuilding site.  All of the British merchant ships built in Calcutta were built with Myanmar teak logs which were said to be the best at that time.  Once the wood was depleted from India, teak logs were harvested from Thailand and Burma.  The British needed many ships to be able to go on to conquer and take control of British colonies and the naval fleet was their primary means. 

Teak forests were quickly being depleted.  Teak was now the preferred wood used for building ships as we have previously explored.  The wood was also impervious to wood rot and insects, like the mighty woodworm, (side note: The famous Ocean liner “Queen Mary” used no less than 1000 tons of teak when built).  The British quickly realized the depletion of teak wood that was taking place and developed a re-forestation plan.  They appointed a leader to head this new bureau and began replanting teak trees on what are now called teak “plantations”.  A set of very strict laws were enacted regarding who can cut teak wood and who can purchase it.  Once these laws were set in place, one needed to have permission from the British Government to be able to cut a teak tree down and or export it.  Teak was also being used by the locals for furniture, posts for houses and paneling, (another side note: India is the third largest importer of teak wood today, behind China and Japan.  As much as 80% of India’s timber consumption is teak).  Teak wood is used in India today for local consumption; building homes, furniture, outdoor furniture, fencing, etc.  It is the one wood that can withstand the monsoons, the blistering heat and the humidity.  It is the wood that all other timber species are compared to.

Due to the large demand for teak wood today, many countries that now have government controlled plantations are reviewing the possible rotation (cutting down the teak wood trees) after 30 or 40 years.  The consensus with this rotation is that the wood will not be inferior at that rate.  However, there are some countries that are trying tree rotation after only 25 years.  This would help their particular economy by turning out teak wood more frequently.  The result of this shorter rotation cycle is timber that is smaller in diameter, color, and grain. 

Because most teak wood today is grown on plantations, and the demand is growing at an estimated 10% per year, teak is still heavily regulated and is sold through the auction process.  It is not very easy to get.  There are still the regulatory permits that must be purchased and other expenses that go along with regulation.  For example, once purchased, it is usually the purchasing companies’ responsibility to provide transportation if the teak wood is to be exported, and certain countries have regulations on how many logs can be exported.  Currently, Java, Indonesia is the largest exporter of teak.  There are several companies located in Java that will process and fashion the teak wood into furniture or planks for flooring or siding, and then export the finished items to countries around the world.

For those who like to invest, there are several plantations that have been started and are taking on investors right now.  Many countries depend on teak wood exports for their financial stability.  One country for example that has two main exports:  Rice and Teak, where rice was the number one money generator recently has experienced a turnaround and teak became their number one export deriving most of their money.  Upon learning this, several other countries are developing strategies and seeking locations where they can begin their own teak plantations.

Remember, because of the characteristics of teak wood, teak wood patio furniture will last about 75 years.  This needs to be taken into consideration when making your purchases.  When regular maintenance is performed (which means to clean it periodically) the true annual cost for your outdoor patio furniture really only comes out to about $133.00 per year (based on a $1000 investment).

So, when you add it all up, you get a much better understanding of what the hype about Teak Wood is all about: the numerous qualities of Teak Wood: the supply and demand side of Teak Wood: and last but not least, the answer to the original question,”Why does Teak wood patio furniture have to be expensive?”

When investing in your outdoor patio or garden, or decorating the verranda, and even for indoor decorating, teak wood outdoor patio furniture is simply the wisest choice you could make.



BENNIE

Eliza asked:


When it comes to hard wood floor cleaning and refinishing, many people simply don’t understand the differences. The first step in preserving the beauty and luster of hard wood flooring is to know what type of wood was used and the proper method of cleaning and caring for the floor.

One of the best places to begin is by understanding wood floor hardness. As a general rule of thumb, the higher the traffic area the harder the wood should be but keep in mind, maintenance and general care also make a big impact on the longevity of a wood floor. Here to help sort things out is a basic primer on the hardness of your hard wood floor with some of the most frequently asked questions or areas of confusion surrounding the care and cleaning of hard wood floors.

Fact: Hardness is not strength! Don’t confuse the hardness of a wood with the strength or feel of the wood. Hardness is simply how well it will resist damage from scratching, punctures or pressure.

Fact: Manufacturer Matters. The hardness of a wood depends upon the type of tree used to create the wood and the manufacturer. Although most woods of the same species will exhibit similar hardness qualities, there will still be variations between two different manufacturers based upon how the flooring was created, what chemicals were used, thickness and other variables.

Fact: There is a wood for every room. Not sure what types of woods go where? Use softer woods for areas with less traffic and harder woods for areas that will need to hold up to more wear and tear. For example North American Cherry is a beautiful wood but very soft with a hardness rating of only 950. Natural bamboo comes in at 1410 while Brazilian Teak stands out at an impressively dense 3500 rating! Many exotic hard woods are not only beautiful but extremely dense and resistant to damage – but keep in mind many are endangered and contribute to the destruction of the local ecology.

Fact: Red Oak is a versatile choice. Most old floors used red oak and still look great even though they have a hardness rating of only 1260 on average. With proper care and preservation any floor can look great for many years to come.

Fact: Fort Worth wood floor cleaning and Hardwood floor cleaning doesn’t need to cost a lot. Hire a reputable company with a nationwide reputation like Kiwi Services to clean, repair and preserve your hard wood floors. Properly performed cleaning and preservation not only keeps floors looking great but prolongs the life of your investment for years to come.



BOYCE

Michael Ochoa asked:


You are contemplating your first purchase of Teak Furniture and you are wondering if you making the right decision? Well, you are and in this quick article, I will explain why I believe that.

If you already use Teak Wood in some of your favorite outdoor furniture, then this article will just be fun information for you to know and share with your friends when they ask you, “why did you buy Teak Wood” versus ?????.

It is no surprise, or it should not be, that Teak Wood has been the favored wood for generations. The secrets of this wood are out and they have been for a long, long time.

First, a little history lesson: (You will love this part)

It is not a well known fact, but is has been written that the Chinese have been renowned sailors for generations. Many of their ships were built and designed to not only sail in the oceans, but also to move up river. Much of the trade then, was done several thousand miles up river and not out in the ocean. These ships needed to be versatile, durable, and tough.

The wood used to build these early Chinese ships was Teak. It is also said that the Chinese shipbuilders would bury the wood logs in moist soil for years prior to building their ships. This made the wood much stronger and impervious to anything that could be encountered on the high seas, including enemies. Why was this important? It was important because approx. 600 years ago the Chinese were set out on a task by the Chinese Ming dynasty to sail to the edge of the world. Apparently they circumnavigated the world several times. But this is going off to another subject. Let’s get back to the subject at hand (I’ll bet you didn’t know that you would actually be learning something too?).

Later in years, British naval ships were made from Oak, also a very hard and durable wood. The British encountered two problems with oak: Wood Worms and a lack of Oak trees. Woodworms were destroying the ships in the British Naval Fleet. Woodworms were the scourge of wooden ships throughout history. It could take 850 oak logs to repair one ship. It took a little over 2000 oak logs just to build one ship. The British needed ships as they continued for some time to have maritime issues with the French, and to be able to go on to conquer and take control of British colonies. The British naval fleet was their primary means to accomplish this.

The Oak supply in Europe was being quickly depleted. They knew about the Teak wood used on the Chinese ships and how rugged they were after having run into them, literally in the shipping lanes. The British had learned how impervious these ships were to all of the elements at sea: Saltwater, ocean wind, and the blistering sun. It was also learned then that Teak was found to not to splinter when hit by gunfire or artillery fire. This was a very important issue as splintering wood was the chief cause of casualties among naval warfare in the eighteenth century.

Britain was very interested to grow and produce this wood. The British quickly realized they did not need to grow Teak Wood as they could annex those countries where the Teak wood was grown and have a plentiful supply. India, Thailand and Burma were quickly annexed into the British Empire. It is not to say this is why the British took over these areas, but it certainly helped to give reason. Myanmar (formerly Burma), which is just south of India, and Yangoon became the first places where Teak was being harvested for British ships. Calcutta was set up as another British shipbuilding site. All of the British merchant ships built in Calcutta were built with Myanmar Teak logs which were said to be the best. Once the wood was depleted from India, logs were harvested from Thailand and Burma.

Teak forests were quickly being depleted. Teak was now the preferred wood used for building ships, Yachts, Ocean liners and furniture. Under ocean conditions, the wood had very little shrinkage or warpage. This meant little maintenance. The wood was also impervious to wood rot and insects, like the mighty woodworm. The famous Ocean liner “Queen Mary” used no less than 1000 tons of teak when built. The British quickly realized the depletion that was taking place and developed a re-forestation plan. They appointed a leader to head this new bureau and began replanting Teak trees on what are now called Teak “plantations”. A set of very strict laws were enacted regarding who can cut Teak Wood and who can purchase it. Once these laws were set in place, one needed to have permission from the British Government to be able to cut a Teak Tree down and or export it.

Teak was also being used by the locals for huts, fence posts, and furniture. India is the third largest importer of Teak today, behind China and Japan. As much as 80% of India’s timber consumption is Teak. The wood is used in India today for local consumption; building homes, furniture, fencing, etc. It is the one wood that can withstand the monsoons, the blistering heat and the humidity. It is the wood that all other timber species are compared to.

Teak Wood contains natural oil and Silica (sand) which makes it impervious to insects, and wood rot. These substances also help it to maintain it luster for many, many years, but make it a little more difficult for the manufactures as their blades tend to dull sooner.

When many of the English ships of WWII were taken apart for salvage, the Teak Wood decks were re-manufactured into outdoor furniture like park benches. Even today they can be seen in many parts of Europe still functioning.

Most of the Teak grown today is grown on Plantations that are governed by the local governments. The demand for Teak is growing at an estimated 10% per year. Teak is a heavily regulated (and rightfully so) commodity, and is sold through the auction process. Teak is not very easy to get. There are regulatory permits that must be purchased and other expenses that go along with regulation. For example, once purchased, it is usually the purchasing companies’ responsibility to provide transportation if the wood is to be exported and certain countries have regulations on how many logs can be exported. Currently, Java, Indonesia is the largest exporter of Teak. There are several companies that are located in Java that will process and fashion the Teak into furniture, or planks for flooring or siding, and then export the finished item or semi finished item to countries around the world.

Teak grows very rapidly but still takes approx. 50 years to mature. Many countries are reviewing the possible rotation after 30 or 40 years. This is mainly due to the large demand for Teak. The consensus with this rotation is that the wood will not be inferior at that rate. There are some countries that are trying tree rotation after only 25 years. The results are timber that is smaller in diameter, color, and grain.

So, when add it all up, you get a much better understanding not only of what the hype about Teak Wood is all about, but the numerous qualities of Teak Wood and the supply and demand side of Teak Wood.

Many people for generations have been enjoying the warm benefits of owning Teak Wood products. Outdoor Teak Wood furniture is a Standard for many families and in many gardens, terraces, patios, verandas, ships, and yachts around the world. If you are investing in outdoor furniture, you really owe it to yourself to step into the world of Teak.



GIL

Michael Ochoa asked:


This article contains a plethora of information and would be difficult to take in all at once. For that reason, I have broken this article into two parts.

“Caveat Emptor” is Latin for “Let the buyer beware”.

If you have Teak wood outdoor furniture, there is very little you will need to do be ready for spring and summer gatherings to begin. If you purchased “teak oiled” or “better than teak wood” outdoor furniture, you may be in for a big surprise.

There are several outlets that are selling wood outdoor furniture using phrases like, “Teak oiled wood furniture”. Teak oiled means just that: the wood that the furniture is made from has been oiled with Teak oil. Period. It is not Teak wood as many of us who may have purchased it would have hoped to believe.

Part of the problem is that we are all looking for the “deal”. We want to pay as little as possible for high quality items so badly that we often overlook or don’t look at all at what we are actually getting for our money.

What does “Teak like” furniture mean? Does that mean that the wood has high silica content like Teak wood? Does it mean that the wood will weather all the natural elements and last 75-100 years left outdoors, like Teak wood will? What exactly does it mean?

Look at this verbiage on any number of websites or in any number of stores and you will see it. Some of these outdoor wood furniture pieces that are the “GREAT DEALS” are made from a wood called Nyatoh, not Teak. It is sold as an exotic hardwood and many outlets and advertisers call it a wood which wears and behaves like teak? Go on to E-Bay and you will find sellers who are advertising it as “stronger than teak wood”. In fact, that is not true.

Who are these marketers trying to kid? Guess what, they are trying to kid us all. Marketers are very good at putting spins on things to make us, the buying public, think one thing, and because we did not pay attention, it turns out to be something completely different.

Where are many of the consumers getting these great deals and purchasing their “Teak like” outdoor furniture? It is reported that many of these wood outdoor furniture sets are being purchased from big chain department stores located in each and every town across the United States, as well as local grocery and drugstores, and on the internet.

Take a look at Nyatoh versus Teak in one area of wood measurement: Durability. Nyatoh wood is generally rated as Class 3, nondurable to moderately durable, and has a low resistance to termite attack. Its sapwood is liable to powder-post beetle attack. Other woods more familiar to us with this similar durability rating are: American Cherry: African mahogany: Japanese Oak: Southern Pine: American Walnut: and Western Red Cedar, just to name a few.

Teak woods durability is classified as Class 1, Very Durable. Woods in this class include Ebony: Iroka: Makore: and Opepe to name a few. And this is just one area of measurement we are looking at, (just as a side note, class 2, which is Durable, contains familiar woods like American Oak: Balau: Sweet Chestnut: Cedar: Ekki: and Karri woods to name a few).

Nyatoh wood is protected with oil. Once treated, this wood should consistently be treated each year to maintain some protection from the elements. When it comes to Nyatoh wood, the consumer must pay particular attention to sufficiently oiling the “joints” where the protection is needed most. If water gets trapped in the joints of this wood, wood rot will begin.

There is absolutely nothing wrong with Nyatoh wood at all. It is being fashioned in very similar styles of other high quality outdoor furniture. If you are looking for the deal, make this purchase. Just be aware of what it is you are really buying. It is NOT Teak wood. You will need to maintain it differently than you would Teak wood and you may need to replace it more frequently just as you have your previous outdoor patio furniture.



BRENT